This tap timer is use for micro-irrigation and running times are 2,5,10 and 15 mins.It is simple easy installation and programming.
That Irrigation frequency are once every 12,24 and 48 hours separately and has rain delay functions from 2 hours to 22 hours.
It programmed on/off times saves water perfect for drought and non-drought conditions.
Features and Benefits
●Multi-function button CLICK
● Inlet threaded for tap 3/4″M and 3/4″ F
●Powered by 3 AAA 1.5 V Alkaline Batteries
●Battery compartment with O-Ring
●Diaphragm solenoid valve
●Working water pressure: 0.5 bar to 5.0 bar
●Flow rate: 5 L/MIN to 35 L/MIN
- For added convenience, This tap timer is use for micro-irrigation and running times are 2,5,10 and 15 mins.It is simple easy installation and programming. That Irrigation frequency are once every 12,24 and 48 hours separately.
- The water timer’s outlet and inlet adopt standard 3⁄4″ (GHS) threaded that can be connected to any garden outdoor hose faucet, you don’t have to worry about leaking water. The outlet has a mesh funnel that filters impurities from the water, make plants grow better.
- Easy to use: The only button on the dial can set the start time, watering time, watering frequency and so on. Press and hold the button for 3 seconds, the sprinkler timer can switch to the manual mode, and after the end, the hose timer continues to execute the previously set program.
- The irrigation timer requires 3 3A batteries (not included) and can operate for more than 1 year. 4 seconds does not operate, digital water timer goes to sleep, which can save a lot of power. An internal enclosed battery compartment isolates the battery from water.
- The digital water timer is made of ABS material and has a solid structure, no leakage, moisture, insect and stain. Hose timer for irrigation applications in gardens, yards, greenhouses, flowerbeds, and etc.