Timing button instructions
Set the time: Hold the “clock”, and then press the “minute, hour. week”, and set according to the current time.
Set the watering time: Press the “program”, the screen will change to setting interface, then press “minute, hour, week” for presetting the pump working time, and then press the “program” for next time set (Others same as this setting, this machine can maximum have 80 setting). Press “clear” to remove the current setting; press the “clock” to exit. After setting, the machine will cycle running according to preset time. (NOTE: The screen shows “Week123456” , which means that it runs every day)
Set volume of water irrigation each time: Hold the “program” button (Screen count after 80 times) until the screen appears “E10” etc. character (10 means irrigate 10 second), then press “Hour, minute” button, for each time that the pump running between 01-99 seconds.
- The timer can be set up to 80 times per day (weekly), adjustable from 1 to 99 seconds, and then cycled works.
- Built-in lithium battery, after the battery is fully charged, it can pump about 60 liters of water. It is equipped with a charger, which can be plugged in power supply and solar charged automatically.